Rimpact
Insert de pneu Rimpact PRO V2
Insert de pneu Rimpact PRO V2
4.85 / 5.0
(217) 217 total des critiques
Impossible de charger la disponibilité du service de retrait
Contenu par paquet :
1 insert de pneu PRO V2
Caractéristiques :
55 mm de large
Couche Pro de 6 mm
Compatible avec les pneus de 2,4” à 2,6”
Compatible avec les jantes de 25 mm à 35 mm
160 g – 29” et 150 g – 27,5”
Vous souhaitez tirer le maximum de performances de vos pneus de VTT ? Ne cherchez plus : l’insert de pneu Rimpact Pro V2 est fait pour vous. Fabriqué à partir d’une mousse à cellules fermées de double densité, le Rimpact Pro V2 offre une durabilité et une résistance incroyables face aux terrains les plus difficiles. Dites adieu aux crevaisons par pincement, aux crevaisons classiques et aux déchirures de pneus grâce aux propriétés d’absorption des chocs du Pro V2, qui contribuent non seulement à prévenir les dommages sur vos jantes, mais offrent également une conduite plus douce et plus rassurante.
Conçu pour soutenir votre pneu à des pressions plus basses, le Rimpact Pro V2 est le choix idéal pour un large éventail de cyclistes, des amateurs du week-end aux professionnels chevronnés. Idéal pour l’enduro et la descente, le Pro V2 vous accompagne partout.
Le Rimpact Pro V2 améliore les performances de l’insert Pro, lauréat des tests en groupe. Il utilise une conception à double densité avec une coque de protection dense qui aide à dissiper les forces extrêmes. Il fonctionne en combinaison avec notre mousse Original classique, qui réduit les vibrations et maintient les talons en place. Fabriqué à partir d’une mousse à cellules fermées de haute qualité, le Rimpact Pro V2 est conçu pour offrir un gain de performance maximal, vous permettant de rouler à des pressions plus basses sans les effets négatifs associés tels que les dommages sur la jante, les crevaisons et le manque de soutien. Sa conception unique offre une absorption des chocs incroyable, réduisant le risque de dommages au pneu et vous donnant la confiance nécessaire pour aborder n’importe quelle trajectoire en toute sérénité.
Le Rimpact doit être utilisé avec une valve compatible avec les inserts.
Utilisez environ 25 % de liquide préventif en plus de la quantité recommandée sur le flacon afin de garantir que la surface supplémentaire de l’insert soit recouverte d’une quantité généreuse de liquide. Nos inserts sont à cellules fermées et ne peuvent pas absorber de liquide, mais une partie du liquide préventif adhère à l’extérieur de l’insert, ce qui nécessite une quantité légèrement supérieure. Il peut être injecté à l’aide des valves Rimpact, mais il est préférable de le verser directement dans le pneu.
Veuillez suivre les instructions d’installation avant la pose/le retrait. Un code QR figure sur l’emballage et vous redirigera vers la page d’installation de ce site web.
Avis de non-responsabilité : il est déconseillé de rouler à des pressions en dehors des recommandations des fabricants de pneus. Le non-respect de ces recommandations peut entraîner des blessures ou la défaillance prématurée du vélo. Rimpact décline toute responsabilité en cas de mauvaise utilisation de l’insert Rimpact ou d’installation incorrecte.
Les inserts Rimpact sont conçus pour être utilisés AVEC les valves compatibles avec les inserts Rimpact.
Non inclus : valve, pneus, roues.
Partager

Good value for a solid product. Save my time a few time over in the past so back for more!
They're way tougher than you think - you don't have to be over gentle when fitting them.
Awesome inserts, survived Mountain of Hellüí™üí™
Great service, awesome inserts. Best on the market.
Very smooth. Can't wait to get the inserts.
- 5 stars: 192 (88%)
- 4 stars: 18 (8%)
- 3 stars: 6 (3%)
- 2 stars: 1 (0%)
- 1 star: 0 (0%)
I will never ride without them! I got them via friend referral as a flat backup for the La Ruta race across Costa Rica. Sure enough, day 3 I flew into a rock garden and flatted. It was a really fast stage, and I only had 1.5 miles to go. I put the hammer down on a complete flat, but rideable thanks to the inserts; placing 8th. I am also able to run lower pressure with all of the benefits.
Picked up a Rimpact and Rimpact Pro for my bike after wrecking a tyre at a local enduro. Fitting a brand new Double Down DHR was easy thanks to the instructions on the Rimpact site. Since then I have done another local enduro (won the vets class) where the wheels took a few really big hits with zero damage to the tyres or rims. I'm a Rimpact convert.
Good value for a solid product. Save my time a few time over in the past so back for more!
They're way tougher than you think - you don't have to be over gentle when fitting them.
Awesome inserts, survived Mountain of Hellüí™üí™
Great service, awesome inserts. Best on the market.
Very smooth. Can't wait to get the inserts.
Reliable product just a thumb breaker to fit.
inserts and valves are very good, this will definitely not be my last purchase from Rimpact. Kind regards form Poland üáµüá±
Great
All goooood.
Prompt delivery, great products!
Never ride without protection.
Great product
Bit of an art to fitting, particularly with continental tyres and DT Swiss rims, no fault of the rimpact so far wheel is intact after some big hits!
Eventho it’s pretty hard to install it alone but all together it’s a great product and worth it to buy in my opinion :)
I recently installed Rimpact inserts before riding the Ard rock enduro epic event. I’d ridden this three times previously but with the Rimpacts fitted I was able to take the tougher sections faster and took time off my previous timings. A great product with a very helpful video for fitting them on the web.
Great product….recommended
I used to suffer regular pinch flats and rim dings so I was advised to try out these inserts. The change has been dramatic. I've been using Rimpact inserts in all my ebikes for a few years now and punctures are pretty much a thing of the past. They do add a fair bit of weight to the wheel but it's worth it for the extra reliability. Highly recommended.
These inserts transformed my wheels. A bit tricky to fit, but once on they ride amazingly. I live in a super rocky area and these inserts have saved my rims on many a trail.
Best of the best
It was a pain to install on a 27mm rim in a 2.4" tire, and when I want to deflate it, the air seems to be stuck between the outer part of the insert and the tire, so the tire is still rock hard but even with my valve wide open, it won't deflate.
The insert won't let the air through.
Installing it was the hardest part. But after several rides, I can confidently say that it was absolutely worth it. A clear recommendation.
The front Rimpact split when my local bike shop were fitting. Rimpact quickly replaced this, which is where I think a company shows whether it is good or not. When something goes wrong, prompt response. The first bike feels good so far.
Thanks
Easy
Top service and communication!
Great site plenty of information
Great products and great service
Website was decent, easy to order. Product is great, just follow the instructions on the website! I left it on a bare rim to stretch out overnight, and found it relatively easy to fit with the tyre. I made one schoolboy error, I didn't have spare sealant on hand when I fitted it, so went to add it the next day via the valve. This can be very tricky to get right! I ended up using a 100ml syringe about half full of sealant, squeeze some in, and then pull back to let some air pressure out, massage the insert a bit, and repeat. If you don't let some air out, it will spray sealant up your curtains (not that I did that of course.... )
good
Great product, good price,fairly easy to put them over the rim. Fills great while riding without feeling extra heavy or bulky. However puting tyre on its a hell of a job. being amatur i have bent my brand new rims... hence 4 starts
Easy to order, free shipping is always appreciated!
I've been running a Rimpact Pro II for approx 6 months and the wheel has been hammered during that time: but for a change I've not had a single pinch flat, ding, burp : nothing! Just more and more miles and smiles :)
So when it came to building up a wheel for my 2nd bike I naturally went for the same again and am very happy.
Fitting takes a bit of a knack: but the first time is hardest - after that it gets easier. Only real downside I can think of : the chances of removing the tyre trailside (to do something like fit a tube) are pretty slim - the tyre is more difficult to unseat than if there was no insert.
Anyway - 5 stars from me! TBH: its hard to believe we used to ride mountain bikes without inserts like this!